Smallest Preamp Phantom/preamp Power For Mics.?
Phantom/preamp power for mics.? - smallest preamp
I have a question
I have a small 6-channel mixer for recording on my battery. My problem is that 4 ich dynamic drum mics (for the snare drum, bass, and toms) and two condenser microphones for cymbals. Capacitors, as I said, runoff and the mic preamps, phantom power in the blender. But I also said that the phantom power can damage the dynamic microphones.
How do I activate the phantom power for the channels, the capacitors?
|
1 comments:
According to the limits of the mix, you can not probably choose to add ghost to individual channels. However, in general micrphones dynamics affected by phantom power. Microphones Tape, on the other hand, are much more fragile and should never be subjected to a phantom power, but the dynamic is usually strong enough. You will notice some changes in the volume / tone.
If you have concerns about adding phantom power to its momentum, there are several ways of units engaged in the phantom power. They are found in sweetwater.com or an exhaustive search on eBay can provide some results.
But I would not worry too much about the extra 48v dynamic damage model.
Post a Comment